|
Busbar Insulation
Shrouds / Boots are flexible, reusable electrical
insulating covers for bus and Switchgear connections.
these pliable Shrouds / boots can be installed,
removed or
replaced in few minutes. Made from polyvinyl chloride
material (PVS), it is formulated specially for electrical
applications at high voltages
Features :
- Suitable for
insulating busbar joint works applications
(Tees, Elbows etc.)
- Provides significant
reduction in air clearances.
- Special buttons
makes it quick to install, remove or replace
during maintenance
- Excellent electrical
and thermal properties.
- Highly resistant
to UV rays and Ozone. Good for outdoor
or indoor applications.
- Customised design
possible as per end application.
- New design moulds
can be developed in a week.
Technical
Specifications
(As per ASTM Standards)
| Di-electric
Strength |
6.5
Kv/mm |
| Tensile
Strength |
8
N mm2 |
| Elongation |
350% |
| Hardness |
70+ 5
Shore A |
| Density |
1.23
gm/cm3 |
| Continuous Operating Temp. |
-20oC
to 150oC |
| Flammability |
Self
Extinguishing |
|
