|
Heat Shrinkable
Anti-Tracking Cable Breakout are manufactured from high quality cross linked
Polymer compound that offer exceptional
insulation and long term service reliability.
These Breakouts are produced in compliance
with ESI-09-13 standard.
They possess advantageous physical properties,
excellent aging stability and very good
resistance against chemical. Due to its
excellent non-tracking and erosion resistance
inbuilt character these breakout are used
as an integral part of Power Cable
Termination Kits for indoor and
outdoor applications. These breakout provide
a positive environmental seal to the cable
crutch. The breakout are supplied with
or without anti-tracking coating as per
customer's specifications.
Features :
- Quick
and easy to install
- Non
Carbon Material
- Continuous
Operating
Temperature - 40C° to 125°C
- Excellent
weather/UV resistance
- Good
chemical & solvent resistance
|
- Excellent
corrosion resistance
- Corrosion
Free
- Excellent
flame retardant properties
- Unlimited
storage life
- 100%
water proof/perfect
moisture seal
|
SELECTION
CHART
| Code |
No
of Cores |
D
|
d
|
L
|
I
|
Tb
|
Tc
|
|
s
|
f
|
s
|
f
|
s
|
f
|
s
|
f
|
f
|
F
|
| min. |
max. |
min. |
max. |
min. |
max. |
min. |
max. |
+/-10% |
+/-10% |
| GAB-0820 |
3 |
53 |
20 |
25 |
8 |
160 |
188 |
55 |
64 |
3.7 |
2.8 |
| GAB-1330 |
3 |
79 |
33 |
39 |
12 |
200 |
230 |
70 |
80 |
4.3 |
3.2 |
| GAB
2145 |
3 |
110 |
48 |
55 |
18 |
215 |
250 |
80 |
90 |
4.6 |
3.8 |
| GAB-2755 |
3 |
140 |
56 |
70 |
27 |
245 |
255 |
90 |
100 |
4.6 |
3.4 |
D,d : Internal Diameter ; s : as supplied ;
f : after free recovery ; Tb,Tc : Thickness
of body & core
TECHNICAL SPECIFICATION
|
Properties
|
Value
|
Standard
|
|
Physical
|
|
|
| Tensile
Strength |
12
N/mm2 (MPA) |
ASTM
D638 |
| Ultimate
Elongation |
350%
(Min.) |
ASTM
D638 |
| Density |
1.15
+/- 0.2 gm/cm3 |
ASTM
D792 |
| Hardness |
45
+/- 10 Shore D |
ASTM
D2240 |
| Water
Absorption |
0.5
% (max.) |
ASTM
D570 |
|
Thermal
|
|
|
Accelerated
Ageing
Tensile Strength
Ultimate Elongation |
(120oC
for 500 Hrs)
11 N/mm2 (Mpa) (min.)
300 % (Min.) |
ASTM
D2671
ASTM D 638
ASTM D 638 |
Low
temperature Flexibility
(-40oC for 4 Hrs.) |
No
Cracking |
ASTM
D2671 |
Heat
Shock
(250oC for 30 Min.) |
No
Cracking or flowing |
ESI
09-11 |
| Shrink
Temperature |
125oC |
IEC
216 |
| Continuous
Temperature limit |
-40oC
to + 100oC |
IEC
216 |
|
Electrical
|
|
|
| Dielectric
Strength |
12
KV/mm. (Min.) |
ASTM
D149 |
| Volume
Resistivity |
1
x 1014 Ohm.cm(min.) |
ASTM
D257 |
| Dielectric
Constant |
5
(Max.) |
ASTM
D150 |
| Resistant
to track & erosion |
No
tracking,erosion or
flame failure upto 3.25
KV for 20 min. |
ASTM
D2303 |
|
